Hookup Diagrams - Mackie CR2-X BAR PRO Owner's Manual

Hookup Diagrams

This is a typical use for CR2-X Bar Pro. This would be a prime example of utilizing it to play music.
First, make sure the CR2-X Bar Pro is positioned for your setup.
Here a phone is connected to CR2-X Bar Pro via Bluetooth, although it can also be "hardwired"
into the 1/8" stereo input jack using an 1/8" to 1/8" cable. Both options are on display here.
Next, make sure that the input selector switch is set to either Bluetooth or 1/8" / Aux, depending on how
the phone is connected, of course. Additionally, we would suggest setting the EQ preset switch to music.
Now play audio through the phone, making sure that the volume of the phone and CR2-X Bar Pro are above "0".
Once you hear audio, simply adjust volume to taste!
Optional: Is there someone who doesn't like what you're listening to? Well, first off, they're wrong. That's a given.
There is a solution, though. Plugging a pair of Mackie headphones into the 1/8" headphones jack auto-defeats
the speaker output. The top panel volume slider then controls the level going to the phones.
Music Playback
5
OWNER'S MANUAL