Hookup Diagrams - Mackie DRM212-P Owner's Manual

Hookup Diagrams

To next DRM
loudspeaker
input
INPUT THRU INPUT
230-240VAC
50-60 Hz 500W
One convenient feature of the Mackie DRM passive speakers is the ability to connect multiple speakers together easily,
as shown in the illustration above.
DRM passive speakers may be daisy-chained via the speakON connector labeled "THRU". Simply plug the signal source
(i.e., mixer output) into the amplifier's input jack(s), patch the amplifier's speakON output jack(s) to the DRM passive
speaker's input jack, the thru jack to the next speaker's input jack, and so on, daisy-chaining multiple DRM passive
speakers.
THRU
MUTE MUTE MUTE MUTE MUTE
Daisy-Chaining Multiple DRM Passive Speakers
Main
Outs
INPUT
48V
MUTE MUTE MUTE MUTE
CH1
INPUT THRU
SENSITIVITY MODE
0.775V 1.4V
BRIDGE /PARALLEL/STEREO
INPUT THRU
CH2
To next DRM
loudspeaker
input
THRU INPUT THRU
Owner's Manual
5