Viewing Or Changing Wireless Settings - NETGEAR RangeMax WPN824v3 User Manual

RangeMax Wireless Router WPN824v3 User Manual

Viewing or Changing Wireless Settings

You can view or change the wireless settings for the wireless router. If you want to make changes,
make sure to note the current settings first.
Note: If you use a wireless computer to change the wireless settings, you will be
disconnected when you click Apply. Reconfigure your wireless computer to match
the new settings, or access the wireless router from a wired computer to make
further changes.
1. Log in to the wireless router at its default LAN address of http://192.168.1.1 with its default
user name of admin and default password of password, or using whatever user name,
password, and LAN address you have chosen for the wireless router.
2. Select Wireless Settings from the main menu to display the Wireless Settings screen:
Figure 2-2
The settings for this screen are explained in
3. Select the region in which the router will operate.
4. For initial configuration and test, leave the other settings unchanged.
5. To save your changes, click Apply.
6. Configure and test your computers for wireless connectivity.
• If you are using NETGEAR wireless adapters, they display a list of available wireless
networks. While wireless security is disabled, select yours from the list, and connect.
2-4
"Understanding Wireless Settings" on page
v1.0, January 2008
2-5.
Wireless Settings