NETGEAR RangeMax WPN824v3 User Manual page 46

RangeMax Wireless Router WPN824v3 User Manual
Table 4-1. Router Status Fields (continued)
Field
Internet Port MAC Address
IP Address
DHCP
IP Subnet Mask
Domain Name
Server
LAN Port MAC Address
IP Address
DHCP
IP Subnet Mask
Wireless Port. Name (SSID)
See Chapter 2,
"Wireless
Region
Settings," for
details.
Channel
Mode
Wireless AP
Broadcast Name
4-4
Description
The Ethernet MAC address being used by the Internet
(ADSL) port of the wireless router.
The IP address used by the Internet (ADSL) port of the
wireless router. If no address is shown, the wireless router
cannot connect to the Internet.
Indicates if the IP address is assigned automatically.
The IP subnet mask used by the Internet (ADSL) port of the
wireless router.
The Domain Name Server (DNS) IP addresses used by the
wireless router. These addresses are usually obtained
dynamically from the ISP.
The Ethernet MAC address used by the local (LAN) port of
the wireless router.
The IP address used by the local (LAN) port of the wireless
router. The default is 168.192.0.1.
• If Off, the wireless router does not assign IP addresses to
PCs on the LAN.
• If On, the wireless router assigns IP addresses to PCs on
the LAN.
The IP subnet mask used by the local (LAN) port of the
wireless router. The default is 255.255.255.0.
The service set ID, also known as the wireless network
name.
The country where the unit is set up for use.
The current channel, which determines the operating
frequency.
The current wireless connection mode.
Indicates if the Access Point feature is disabled or not. If not
enabled, the Wireless light on the front panel turns off.
Indicates if the wireless router is configured to broadcast its
SSID.
v1.0, January 2008
Managing Your Network