NETGEAR RangeMax WPN824v3 User Manual page 98

RangeMax Wireless Router WPN824v3 User Manual
configuration (continued)
network, troubleshooting 6-7
restoring 4-2, 6-8
configuring
QoS 5-19
remote management 5-15
static routes 5-13
WEP 2-9
WPA 2-7
connecting automatically 5-5
connection mode 2-5, 4-4
connections
detecting 1-4
Internet. See Internet connection
setting up manually 1-5
troubleshooting 6-1, 6-3, 6-5, 6-7
content filtering 3-1, 3-2
crossover cable 6-3
CTS/RTS threshold 2-11
current bandwidth 4-5
custom services, blocking 3-6
customer support ii
D
data protocols A-1
date and time, troubleshooting 6-9
daylight savings time 6-9
default DMZ server 5-5, 5-6
default factory settings
listed A-2
restoring 4-2, 6-8, A-3
default gateway 4-6
default LAN IP address 5-7
default subnet mask 5-7
deleting
keywords and domains 3-4
QoS policy 5-22
denial of service (DoS) protection 3-2, 5-5
destination IP address 5-13, 5-14
destination port number 3-4
Index-2
detecting Internet connection 1-4
device names 4-7, 5-22
devices
attached 4-7
remote, troubleshooting 6-7
DHCP
logging in and 1-2
required for connection 1-5
status 4-4
wireless repeating and 5-2
DHCP server 4-6
default settings A-2
remote management 5-8
setting up 5-9
direction, routing information 5-8
Disable Advanced 108 Mbps Features check box 2-11
disabling
UPnP 5-17
wireless client association 5-3
wireless LAN 2-7
WMM QoS 5-19
DMZ server, default 5-5, 5-6
DNS (Domain Name Server) 5-10
DNS address. See Domain Name Server (DNS) addresses
DNS server
current 4-6
primary and secondary 1-7
troubleshooting and 6-6
documentation ii, B-1
Domain Name Server (DNS) addresses 1-7, 4-4
Domain Name Servers (DNS) 5-10
domain names 1-7, 5-12
domains
blocking 3-3
deleting 3-4
DoS (denial of service) protection 3-2, 5-5
Dynamic DNS 5-10
Dynamic Host Configuration Protocol (DHCP) server.
See DHCP server
dynamic IP addresses 1-7
v1.0, January 2008