Precor C954i Owner's Manual page 32

C O M M E R C
The QUICKSTART key can be pressed any time during the Setup prompts.
Default values apply after that point. See the table below:
Press QUICKSTART at the,...
Precor banner
Program prompt
Workout Time prompt
Distance Goal prompt
Calorie Goal prompt
Weight prompt
Age prompt
ENTER: Workout specific prompts need to be answered and "entered" into memory.
Pressing ENTER selects the information displayed and processes it.
page 32
I A L P R O D
The following occurs:
You bypass the Setup prompts. A message
appears, Belt Starting 3, 2, 1,... and your work
out begins in Manual mode.
The displayed program is accessed.
Note: If you press QUICKSTART after
selecting the Distance Goal or Calorie Goal
programs, the default values are:
Distance Goal: 3 miles (5 kilometers)
Calorie Goal: 300
The time that appears on the display
becomes the workout time limit.
The displayed number is set as a distance goal.
This prompt only appears when the
Distance Goal program is selected. Allowable
distance entries: 0.1 to 50.0 in miles (or
kilometers).
The displayed number is entered as the
calories goal. This prompt only appears when
the Calorie Goal program is selected.
ENTER between 1 to 5000 calories.
The weight that appears on the display
becomes your designated weight that the
treadmill uses to compute statistics. Acceptable en-
tries: between 0 and 999.
The age that appears on the display
becomes your designated age that the tread-
mill
correct age entry between 0 and 99 is very
important if you plan to utilize the heart rate
characteristics of the treadmill. The
QUICKSTART key acts the same as the
ENTER key at this point because you have
answered all the Setup prompts.
U C T S D I V
uses to compute
I S I O N
statistics. A