Advertisement
Replacing the Battery
Your Rz2 remote control comes with one CR2032 battery installed. When the range
of the remote seems reduced or if it ceases to work properly, it's time to replace the
battery.
1. Slide battery compartment cover on rear of remote
control off and remove battery.
2.
Place fresh CR2032 in battery well as shown
(make sure
+/-
polarity matches markings).
3.
Replace battery compartment cover.
WARNING:
Lithium batteries can explode or cause burns
if disassembled, shorted, recharged, exposed to water,
fire, or high temperatures. Do not place loose batteries in
a pocket, purse, or other container containing metal
objects, mix with used or other battery types, or store with
hazardous or combustible materials.
Store in cool, dry,
ventilated area. Follow applicable laws and regulations
for transport and disposal.
Battery compartment
cover
Troubleshooti ng
Problem: Remote doesn't work
Solutions:
A.
Make sure you are within 15 feet of the unit and that the remote is pointed at the
front
of
the unit.
B.
Try replacing the battery (see above),
RZ2 IB-6031 O-A(iP2/iP31
3
Printed in china
Advertisement
