The home system for your iphone or ipod (13 pages)
Summary of Contents for iHome iBT22
Page 1
Bluetooth Wireless Dual Alarm Clock WARNING NOT FOR USE WITH TABLETS instruction manual...
Page 2
Introduction Thank you for purchasing the iHome iBT22. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit.
Page 3
FCC Information FCC ID: EMOIBT22 IC: 986B-IBT22 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 4
FCC ID: EMOIBT22 Cet équipement est conforme aux limites FCC relatives à l'exposition à la radiation par radiofréquences IC: 986B-IBT22 établies pour les environnements non contrôlés. Cet émetteur ne doit pas être colocalisé ou utilisé en conjonction avec tout autre émetteur ou antenne.
Table of Contents Included/ Meet Your iBT22..................... 1-2 Installing Clock Backup Batteries ..................3 The Display/ Setting Up the Unit/ Turning the Unit ON and OFF ..........4 Setting the Time/ Daylight Saving Time ................5 Setting the Alarms/ Reviewing, Arming and Disarming Alarms ..........6 Resetting the Alarm to Come on the Next Day ...............6...
Page 6
Included Installing the Backrest • iBT22 Alarm Clock 1) Gently insert the front tabs of the included backrest at • 100V-240V universal AC adaptor a slight angle into the slots on top of the unit (behind • Backrest the buttons).
Replacing & Installing Clock Backup Batteries The iBT22 uses 3 AAA batteries (included) for backup to provide continuous alarm operation and clock settings in the event of a power failure. If the backup batteries have been installed and a power failure occurs or the AC adaptor is accidentally disconnected, the display backlight will not remain lit, but current time and alarm time settings will be temporarily maintained.
Using the The Display Bluetooth Indicator Alarm 1 & Alarm 2 Indicators DST indicator Sleep Indicator SLEEP AUX-IN Battery Low Indicator Aux-in Indicator PM Indicator Time Display Alarm time AM/PM Indicator ALM. YEAR Year/Date Indicator DATE Alarm Time/Date Display...
Setting the Time Using the 1. Press and hold the Clock Adjust Button (located on the back of the unit) until the time flashes in the display and a beep sounds. 2. Press and release the – or + Buttons to adjust the clock to the current time (hold to advance or reverse rapidly).
Setting the Alarms 1. By default, the unit selects the most recently linked Bluetooth device as your wake-to source. If no Bluetooth device is detected, the iBT22 will automatically default to buzzer alarm. See page 8 to setup your Bluetooth device.
Snooze can be pressed several times during the 1 hour alarm cycle. Sure Alarm The iBT22 has a sure alarm feature. If backup batteries are installed, the buzzer alarm will still sound in the event of power failure.
Bluetooth icon will flash on the display, indicating the unit is in pairing mode. 3. “iHome iBT22” should appear in your device’s menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome iBT22” to connect it. If prompted for a passcode, enter “1234” on your device’s keypad.
Using the Pairing with a Different Device 1. When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (approx. 30 feet). So, to pair with a different device you must turn off the Bluetooth capability of the already paired device.
Using the Playing Audio via Aux In 1. Connect one end of the included 3.5mm stereo audio cable to the Aux-in jack on the back of the unit and connect the other end to the headphone or line-out jack on your audio device.
Using the Sleep Operation Sleep mode lets you sleep to your Bluetooth device until the unit shuts off at a selected time. It will send a power off command to your device,too 1. Press the Sleep Button to enter sleep mode. The Sleep Icon will appear on the display to indicate it is in sleep mode.
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Page 18
8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time.
Unit doesn’t respond (no power) • Check that all connections are correct and properly plugged in. • Make sure your device is properly paired with the iBT22. • Make sure the Power is ON, indicated by “ON” appearing briefly on the display.
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.