Diamondback 510Er Owner's Manual page 24

Demo/Idle Mode
Power Save Mode
LCD
Watts
Resistance Level
Heart Rate
Control
Heart Rate Sensors
Sensors
Default Values
Age
Weight
Time
Resistance Level
NOTE: The default values for Age, Weight and Time will update when changed in the User Settings Mode.
24
The Demo Mode operation is identical to the Banner Mode except the console will never power off
and enter Power Save Mode. Primarily used for in‐store displays, the console ships with the factory
default of "Demo Mode On". The user may choose between the Demo Mode and the Banner Mode
in Console Setup mode (see the section titled Console Setup on page 26).
The unit will be plugged in, but no power will be supplied to the console. Pressing any key on the
console or rotating the pedals will launch the Banner Mode.
An acronym for liquid crystal display. The 510 display screen is an LCD with integrated backlighting
for excellent visibility.
A unit of measurement which correlates to the rate energy is generated.
Also called intensity level. The load applied to the workout by the unit. The higher the intensity level,
the higher the resistance. There are sixteen (16) resistance levels.
Also called Interactive or Heart Rate Control. To maintain a constant heart rate target, the computer
console will automatically adjust the resistance or load up or down to increase and decrease the
user's heart rate.
Located on the fixed handlebar, the user can monitor their heart rate during a workout by simply
gripping the touch heart rate sensors.
35 years
150 pounds (68 kg if system is operating in metric mode)
30 minutes
Level 1