Maintenance - Diamondback 910Ub Owner's Manual

MAINTENANCE
All Diamondback Fitness products are engineered for years of near‐silent operation. Let noise be your first indication that a repair or
adjustment is required. Please, discontinue use immediately and contact an Authorized Service Technician or Diamondback Fitness Dealer if an
unusual noise, scraping, knocking, grinding or vibration is detected. Often, a minor issue will become a major repair if ignored and use is
continued.
Prior to each workout, confirm that all adjustment levers and screws are tightened.
Your Diamondback Fitness product is manufactured of the most durable materials available. The plastics are molded of strong and chemical‐
resistant ABS and PVC. The frame is produced of high‐tensile steel and protected with an industrial‐grade, powder paint coating for the
highest level of corrosion resistance. It is important to note however, that perspiration can be extremely corrosive if allowed to accumulate on
the machine. After training, always wipe down the unit with a mild soap solution followed by a thorough drying with a clean towel. Positioning
a small spray bottle and towel near the unit will help ensure that your Diamondback Fitness equipment looks new for many years.
NOTE: Perspiration is very corrosive and if allowed to remain on the machine, will cause discoloration, fading, rust and
odors. Unfortunately, these conditions are not covered under the Warranty Policy.
38