Checking The Print Alignment - Brother DCP-J125 User Manual

Checking the print alignment

You may need to adjust the print alignment
after transporting the machine, if your printed
text becomes blurred or images become
faded.
a
Press Menu.
b
Press a or b to choose
Ink Management.
Press OK.
c
Press a or b to choose Test Print.
Press OK.
d
Press a or b to choose Alignment.
Press OK.
e
Press Mono Start or Colour Start.
The machine starts printing the
Alignment Check Sheet.
f
Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely
matches number 0.
g
Do one of the following:
 If the number 5 samples of both the
600 dpi and 1200 dpi test prints are
the best matches, press 1 (Yes) to
finish the Alignment Check and go to
step j.
 If another test print number is a
better match for either 600 dpi or
1200 dpi, press 2 (No) to choose it.
h
For 600 dpi, press the number of the test
print that most closely matches the
number 0 sample (1-8).
i
For 1200 dpi, press the number of the
test print that most closely matches the
number 0 sample (1-8).
j
Press Stop/Exit.
62
A