Table of Contents
Advertisement
4. The selected preset number will flash and then remain lit on the display to show
that it has been memorized.
If the preset button you selected already has a channel stored in it, the preset will be
replaced with the newly stored channel.
Recalling Channel Presets
The 10 presets in the active bank (A, B, or C) can be selected by pressing the 0 through
9 buttons.
1. Press the B
AnD
shown in the lower right corner of the default display screen.
2. Press the desired preset button 0 – 9 to select the preset. The channel will change
and the display will revert to the Default screen for the new channel, with the pre-
set shown in the lower right corner.
Pressing and holding the B
M
P
s
y
resets
creen
You can use the Knob to quickly see what's playing on all of your presets:
1. Press and hold the B
2. Turn the Knob in either direction to move through the presets. When the preset you
want to listen-to is highlighted, press the Select button to tune to it.
[
]
62
Operation
button to activate the preset bank you want. The selected bank is
button displays the M
AnD
button to activate the M
AnD
figure 44
p
screen (see below).
y
resets
p
screen (see Figure 44).
y
resets
Advertisement
Table of Contents
