Cutting Height Adjustment; Areas Of Use - Stiga Villa Royal Instructions For Use Manual

There are two positions:
1.Forward position – power take-off dis-
engaged.
2. Backward position – power take-off en-
gaged.
10. POWER TAKE-OFF
(Royal)
Switch for engaging/disengaging the electromag-
netic power take-off for operating cutting decks
and front-mounted accessories. Two positions:
1. Press the right part of the switch – the
power take-off is engaged. The symbol
will light up.
2. Press the left part of the switch – the
power take-off is disengaged.

11. CUTTING HEIGHT ADJUSTMENT

(Royal)
The machine is equipped with a control for using
the cutting deck with electrical cutting height ad-
justment (available as an accessory).
The switch is used to adjust the cutting
height in continuously variable positions.
The contact used for connecting the cutting deck is
mounted on the right side, in front of the front
wheel (fig. 18).
12. DISENGAGING LEVER
(President - Royal)
A lever for disengaging the variable transmission.
Enables the machine to be moved by hand without
the help of the engine. Two positions:
1. Lever pressed in – transmis-
sion engaged for normal opera-
tion.
2. Lever pulled out – transmis-
sion disengaged. The machine
can be moved by hand.
The machine may not be towed over long distances
or at high speeds. The transmission could be dam-
aged.
ENGLISH
13. ADJUSTABLE STEERING
WHEEL (Only selected models)
The steering wheel can be adjusted vertically in 5
positions. Press in the inhibitor on the steering col-
umn and raise or lower the steering wheel to the
desired position.
Do not adjust the steering wheel during opera-
tion.

AREAS OF USE

The machine may only be used for the following
tasks using the genuine STIGA accessories stated.
1. Mowing
With cutting deck 13-2940 (85M), 13-2929
(92M) or 13-2930 (107M), 13-2934 (107M El).
2. Grass clipping and leaf collection
Using towed collector 13-1978 (30") or 13-
1950 (42").
3. Grass and leaf transport
Using dump cart 13-1979 (Standard) or 13-
1992 (Combi).
4. Sweeping
With brush unit 13-0920 which can also be used
for easier snow clearing.
5. Snow clearance
With snow blade 13-0930. Snow chains 13-
0936 (16") and frame weights 13-0921 recom-
mended.
The maximum vertical load on the towing hitch
must not exceed 100 N.
The maximum over-run load on the towing hitch
from towed accessories must not exceed 500 N.
NOTE! Before using a trailer – contact your insur-
ance company.
NOTE! This machine is not intended to be driven
on public roads.
GB