Figure 9 : Sides And Back Spacers Installation; Figure 10 : Fan Electric Connections - Drolet GRIZZLY Installation And Operation Manual

Fireplace assembly (cont'd)
Sides and back spacers
Use the drilled holes on each side
and at the back of the fireplace
structure to align and screw into
place the spacers;
The sides spacers provides a 4''
clearance; (1 each side)
The back spacers provides a 2''
clearance.

Figure 9 : Sides and back spacers installation

Fan rheostat
The fan rheostat has to be connected to
a 110 VAC electric source;
Run the 14 GA wire through the square
opening located at the back of the
structure;
Connect ground wire to the electrical box.

Figure 10 : Fan electric connections

Page 6 of 23