Maintenance; Figure 26 : Cleaning Tee - Drolet GRIZZLY Installation And Operation Manual

Oilburning fireplace insert
Table of Contents

Advertisement

ONCE A WEEK :
Clean the oil inlet tube of the burner with the
cleaning tee :
Ø Push in the rod of the cleaning tee while
turning it;
Ø move back and forth operation 2 or 3
times;
Ø Pull it back into place to finish the
operation.
WHEN YOUR STOVE IS RUNNING, ALWAYS KEEP THE CLEANING TEE LEVER PULLED BACK
INTO PLACE.
ONCE A MONTH OR TWO :
Clean with a metallic brush :
The burner's shell;
The burner's rings;
The burner's catalyst (in blue flame model).
AT THE BEGINNING OF EACH HEATING SEASON :
Clean the valve and tank filters;
Inspect the smoke box through the opening of the rear flue outlet;
Clean the chimney and flue pipe.
MAKE SURE THAT ALL HAND VALVES ARE CLOSED BEFORE CLEANING PROCEDURES.
WHEN NEEDED :
Clean the glass door;
The glasses have to be cleaned only when the stove is cold. Use commercial product for this purpose,
or a water and vinegar solution.

MAINTENANCE

Figure 26 : Cleaning tee

Page 18 of 23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents