Table of Contents
Advertisement
2. SPECIFICATIONS
2.3 PAPER (LABEL/TAG) SPECIFICATIONS
Item
Span of one label/tag
Label length
Width including backing paper
Label width
Gap length
Black mark length (Tag paper)
Effective print width
Effective print length
Print speed up/slow down area
Black mark length (Label)
Outer roll diameter
Thickness
2.4 RIBBON SPECIFICATIONS
Type
Width
Length
Outer diameter
NOTES:
1. To ensure good print quality and maximum print head life use only TOSHIBA TEC specified paper and
ribbons.
2. For further information about paper and ribbon, refer to Section 7. CARE/HANDLING OF THE PAPER
AND RIBBON.
2.5 OPTION
Option Name
B-7204-QM-R
Cutter module
B-7904-H-QM-R
Strip module
B-SA704-IO-QM-R
Expansion I/O
interface board
B-7704-RS-QM-R
Serial Interface
B-SA704-WLAN-QM-R
Wireless LAN
Interface
NOTE: To purchase the OPTIONAL KIT, please contact your authorized TOSHIBA TEC
representative or TOSHIBA TEC Head Quarter.
Label dispensing mode
Label
Tag
Spool type
60 mm ~ 110 mm
(300 m)
Ø65 mm (max.)
Type
Batch mode
Strip mode
25.4 ~ 999.0
15.0 ~ 999.0
23.4 ~ 997.0
13.0 ~ 997.0
25.4 ~ 114.0
22.4 ~ 111.0
2.0 ~ 20.0
10.0 ~ 105.7
15.0 ~ 500.0
15.0 ~ 500.0
MAX. ø152.4 (Paper Core ø38, 40, 42 or 76.2)
0.13 ~ 0.17
0.1 ~ 0.17
This cutter module uses a rotary cutter. It cuts
backing paper of labels and tag paper automatically
in "stop and cut" mode.
This strip module strips the label from the backing
paper with the take-up block and strip block. When
the rewinder guide plate is attached, the tag paper
and label with backing paper are wound.
Installing this board in the printer allows a connection
with an external device with the exclusive interface.
Installing this PC board provides an RS232C inter-
face port.
Installing this PC board allows a communication by
wireless LAN.
2-2
2.3 PAPER (LABEL/TAG) SPECIFICATIONS
[Unit: mm]
Cut mode
Label: 37.0 ~ 999.0
Tag: 25.4 ~ 999.0
31.0 ~ 993.0
2.0 ~ 20.0
6.0 ~ 20.0
2.0 ~ 20.0
1.0
MIN. 2.0
0.1 ~ 0.17
Use
EO1-33076
Hide quick links:
Advertisement
Table of Contents
