4. INSTALLATION PROCEDURE
4. INSTALLATION PROCEDURE
4.1 INSTALLING THE SUPPLY HOLDER UNIT
Turn the power OFF before installing the supply holder unit.
Fit the two studs on the bottom of the printer into the holes in the supply holder unit.
Supply Holder Unit
4.2 CONNECTING THE POWER CORD AND CABLES
Turn the POWER SWITCH to OFF before connecting the power cord or cables.
WARNING!
WARNING!
Inlet
Power Cord
4-1
4.1 INSTALLING THE SUPPLY HOLDER UNIT
Fig. 4-1
Parallel Interface
(Centronics)
Option Slot
Expansion I/O Interface
Serial Interface (RS-
232C)
Wireless LAN Interface
USB
LAN Interface
Fig. 4-2
EO1-33076