Programming A Memory Channel - Icom IC-A24E Instruction Manual

■ Programming a memory
channel
The transceiver has 200 (20 CH × 10 BANK) memory chan-
nels for storage of often-used frequencies.
q Push [CLR• ] to select the frequency mode, if neces-
DEL
sary.
w Select the desired frequency.
• Set the desired frequency using [DIAL] or keypad.
e Push , then push [MR•
gramming mode.
• "M", memory BANK and memory channel number are blink.
r Rotate [DIAL] to select the desired memory channel
number.
• Push , then push [0•
BANK
BANK number if desired.
• Push [CLR• ], [ENT] or push
DEL
the BANK selection mode.
t Push [ENT] to program the information into the channel
and return to the frequency mode.
] to enter the memory pro-
MW
], and rotate [DIAL] to select the
then push [0• ] to exit
BANK
MEMORY OPERATION
• EXAMPLE: Programming 118.250 MHz into memory
BANK 3/ memory channel 9.
Push
Push
Push
(or rotate [DIAL])
or
Push
(or rotate [DIAL])
4
Push
or
Push
Push
4
13