The Firmware Upgrade Utility; Before You Begin (Cs1762) - ATEN CS1762 User Manual

The Firmware Upgrade Utility

The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides a
smooth, automated process for upgrading the KVM switch's firmware. The
Utility comes as part of a Firmware Upgrade Package that is specific for each
device. Check the web site regularly to find the latest packages and information
relating to them:
http://www.aten.com

Before you Begin (CS1762)

1. From a computer that is not part of your KVM installation go to our
Internet support site and choose the model name that relates to your device
(CS1762) to get a list of available Firmware Upgrade Packages.
2. Choose the Firmware Upgrade Package you want to install (usually the
most recent), and download it to your computer.
3. Use the Firmware Upgrade Cable provided with this unit, to connect a
COM port on your computer to the Firmware Upgrade Port of your
switch.
4. Shut down the computers on your CS1764A installation.
5. Invoke Firmware Upgrade Mode (see page 18).
The front panel LEDs flash together to indicate Firmware Upgrade Mode
is in effect.
Chapter 6
29