No.
Component
1
Firmware
Upgrade Port
2
USB / USB
2.0 Hub
3
Console Port
Section
4
KVM Port
Section
5
Power Jack
Note: The CS1764
it uses a USB port in the KVM port section for firmware upgrading. See
Before you Begin (CS1764A), page 30, for full details.
(CS1762 only) The Firmware Upgrade Cable that transfers the
firmware upgrade data from the administrator's computer plugs into
this connector. See Before you Begin (CS1762), page 29, for details.
USB peripherals (printers, scanners, etc.) can plug into this port. The
CS1762 supports USB 1.1; the CS1764
The cables from your DVI monitor, USB keyboard, USB mouse,
speakers, and microphone plug in here. Each connector is marked
with an appropriate icon to indicate itself.
The cables that link the switch to your computers plug in here. Each
KVM port section is comprised of a microphone jack, speaker jack,
USB type B socket and a DVI connector.
The power adapter cable plugs into this jack.
does not have a dedicated firmware upgrade port because
A
Chapter 1. Introduction
Description
supports USB 2.0.
A
9