Advanced Chipset Control - Supero SUPERSERVER 6016T-URF4+ User Manual

S S
UPER ERVER 6016T-URF4+/6016T-NTRF4+ User's Manual

Advanced Chipset Control

The items included in the Advanced Settings submenu are listed below:
CPU Bridge Confi guration
This feature allows the user to confi gure CPU Bridge settings. The items included
in the submenu are listed below.
•
CPU Revision: This item displays the CPU revision number.
•
Current QPI Frequency:
•
Current CPU 1 Memory Frequency:
memory frequency.
•
Current CPU 2 Memory Frequency:
memory frequency.
•
Memory Reference Code:
the motherboard.
•
QPI Reference Code:
erboard.
QPI (Quick Path Interconnect) Links Speed
QuickPath Interconnect (QPI) is the connection between the CPU and the mother-
board's I/O hub. Use this feature to modify data transfer speed for QPI Link con-
nections. The options are Slow-Mode, and Full Speed.
QPI Frequency (Available if the item - QPI Link Speed is set to Full Speed)
This feature allows the user to select the desired QPI frequency. The options are
Auto, 4.800 GT, 5.866GT, 6.400 GT.
QPI L0s and L1
This feature allows the user to set the QPI power state to a low setting. L0s and
L1 are automatically selected by the motherboard. The options are Disabled and
Enabled.
Memory Frequency
This feature forces a DDR3 module to run at a frequency other than what the system
has detected. Select Force SPD (Serial Presence Detect) to force the module to run
at a frequency specifi ed on the SPD table. The available options are Auto, Force
DDR-800, Force DDR-1066, Force DDR-1333 and Force SPD.
This item displays the current QPI frequency.
This item displays the current CPU 1
This item displays the current CPU 2
This item displays the memory reference code for
This item displays the QPI reference code for the moth-
7-8