Table of Contents
Advertisement
S
S
UPER
ERVER 6016T-URF4+/6016T-NTRF4+ User's Manual
1-2
Serverboard Features
At the heart of the SuperServer 6016T-URF4+/6016T-NTRF4+ lies the X8DTU-
LN4F+, a dual processor serverboard based on the Intel® 5520 + ICH10R chipset.
Below are the main features of the X8DTU-LN4F+. (See Figure 1-1 for a block
diagram of the chipset).
Processors
The X8DTU-LN4F+ supports single or dual Intel® 5500/5600 Series processors in
LGA1366 sockets. Please refer to our web site for a complete listing of supported
processors (www.supermicro.com).
Memory
The X8DTU-LN4F+ features 240-pin DIMM sockets that can support up to 192 GB
of registered ECC DDR3-1333/1066/800 or 48 GB of unbuffered ECC/non-ECC
DDR3-1333/1066/800 SDRAM. Please refer to Chapter 5 for installing memory.
UIO
The X8DTU-LN4F+ is a specially-designed serverboard that features Supermicro's
UIO (Universal I/O) technology. UIO serverboards have a PCI Express 2.0 x8 slot
that can support any one of several types of UIO card types to add SAS ports,
SATA ports, additional LAN ports or other additional functions to the serverboard.
This allows the user to tailor the serverboard to their own needs.
Note: the server does not come with a UIO card installed.
Serial ATA
An on-chip (ICH10R) SATA controller is integrated into the X8DTU-LN4F+ to
provide a six-port, 3 Gb/sec SATA subsystem, which is RAID 0, 1, 5 and 10
supported (RAID 5 is supported with Windows OS only). The SATA drives are
hot-swappable units.
Note: You must have RAID set up to enable the hot-swap capability of the SATA
drives. Documentation on RAID setup guidelines can be found on our web site.
Onboard Controllers/Ports
The color-coded I/O ports include one COM port, a VGA (monitor) port, two USB
2.0 ports, PS/2 mouse and keyboard ports, one dedicated IPMI LAN port and four
gigabit Ethernet ports.
1-2
Advertisement
Table of Contents
