Table of Contents
Advertisement
Only For Qualified Installers
Thermostat
Glass Grill
INSTALLATION - Options
Connecting the Optional Thermostat
be plugged into the TH terminals located on the
valve.
only a special low resistance thermostat. DO NOT
USE A REGULAR HEATING THERMOSTAT.
free from corrosion, and tight. Inspect connections
periodically to confirm that no corrosion has built
up over time.
millivolt control system should give many years of
trouble-free service.
the length of the wire:
Burner Button
remote Control Kit
to turn the fire on and off.
and does not need to be pointed directly at the fire-
place.
held sending unit, receiving unit, mounting bracket,
and all wiring.
using the remote or a thermostat. If the switch is in
the "ON" position, the fire will stay on even when
the set temperature on the thermostat is reached.
Glass Grill
slide the top of the vertical bars up into the slots at
the top of the firebox opening. Lower the grill down
so the bottom of the vertical bars rest just inside the
lip at the bottom of the firebox opening.
If the optional thermostat is used, it must
When installing a millivolt control system, use
Be sure that all electrical connections are clean,
When properly installed and maintained, a
It is important to use wire of a gauge proper for
RECOMMENDED WIRE GAUGES
Maximum
Wire
Length
Gauge
00'
4
60'
6
40'
8
25'
20
15'
22
The button on the remote control can be used
This remote uses the ultrasonic control method
The kit includes installation instructions, a hand
Note: The ON/OFF switch must be "OFF" when
To install the glass grill remove the door and
Reinstall door.
27
Advertisement
Table of Contents
