On control
On PC screen
panell
09
10
12
15
60
Problem Correction
Unable to start with presser foot lifted.
Lower presser foot and restart.
Hoop size is too small to move hoop to original position.
Turn off power switch and attach larger hoop.
Hoop size is smaller than embroidery data.
Attach appropriate hoop and restart.
Defect in sewing data.
Transmit correct data.
System error occurs.
Turn off and on power switch to eliminate the problem that caused
the system error to occur. If the error number should not disappear,
consult an authorized technician.
Sewing
Embroidery
○ ○
○
○
○
○ ○