Singer Futura Quartet Instruction Manual page 48

In the case of a 2 hoop design, where one hoop is stacked
on top of the other, position the Guide Lines on the
horizontal cross line and the Center Hoop Marking on the
vertical cross line. See Fig. 4.
6. The next screen prompts you to input the first of three
alignment points, A, B, and C. These alignment points
will inform the machine exactly where the crosslines
are positioned in the hoop. It is extremely important that
the points are accurately input on the cross lines. The
machine is awaiting the input of point A. See figure 3.
Use the shift buttons on the machine to move the hoop,
until the needle comes to point A on the cross line, and
push the OK button.
MULTIPLE HOOP SHIFT BUTTONS AND "CROSS
LINE" INDICATOR LIGHTS FOR INPUTTING POINTS A,
B, AND C
Please Note: The buttons on the machine are lit
to indicate the "cross line" positions of the fabric
in the hoop. The blinking button is indicating the
point to be input.
If a mistake is made when entering the points,
press the clear button, (twin needle/clear button)
to clear the point(s). and then re-enter point(s).
46
Fig. 5
Guide Line
Center Hoop
Marking
Upward
Downward
Leftward
Rightward

A
Center Hoop
Marking
Guide Line
Shift switch
OK switch
Clear switch

b
C