Dialog 3105MW/3145/3145MW/3146
Message waiting indication
Note: This section only applies to the Ericsson Dialog
3105MW and Dialog 3145MW telephones.
Your incoming messages can be indicated by a rapidly flashing
message key (Ericsson Dialog 3105MW telephone) or a rapidly
flashing message waiting lamp (Ericsson Dialog 3145MW
telephone).
On the Ericsson Dialog 3105MW telephone:
Slide the switch to the "MW" position
On the Ericsson Dialog 3145MW telephone:
Slide to change the message waiting indication
Depending on which pins in the telephone line socket that are
supposed to carry the message waiting signals, the switch must be
set in the corresponding position. Please contact your system
administrator for advise.
Note: If your telephone will be used on PSTN (public
networks) the switch should be set in MW(1-6) position.
Adjustments
79