Table of Contents
Advertisement
Abbreviated Numbers
u
e
Head Office
p
e
p
54
Dial By a Function Key
Notes:
This section only applies to the Ericsson Dialog 3145,
Dialog 3145MW and Dialog 3146 telephones.
For the Dialog 3146, make sure the programming slide
switch is set in the "Prog On" position.
You can program and activate directory numbers (extensions and
common abbreviated numbers) on the programmable keys. Stored
numbers can consist of maximum 21 digits on the Dialog 3145MW
and Dialog 3146, and maximum 16 digits on the Dialog 3145.
Lift the handset
Wait for dial tone.
Press to make a call (pre-programmed)
Program
How to program a directory number on the programmable keys.
Press
Press a programmable key
If a number is already stored, it will be erased automatically. If you
would like to erase a dial-by-name number, store a "0" instead of
the telephone number.
z
Dial the number
You can use any directory number, e.g. a common abbreviated
number or a colleague's extension number. You can also store
codes that contain
incorporates a wait for a new dial tone, see section
Calls" on page 18.
Press
Note: You can remove the transparent cover in order to
write the names beside the keys.
*
#
,
and R. To store a number that
Dialog 3105MW/3145/3145MW/3146
"Outgoing
Hide quick links:
Advertisement
Table of Contents
