Pip Mode - Grundig VISION 7 47-7850 User Manual

PIP SOURCE SETUP
PIP Input
PIP Type
Confirm
w
r e
OK
TV
q
TELEVISION OPERATION

PIP mode

PIP (picture in a picture) allows you to watch an inset picture from a
second picture source in addition to the current station.
DVD players and recorders, video recorders or satellite receivers
can be used as video sources. They must be connected to the inputs
on the back of the device.
Displaying the inset picture
1
Press »PIP« once or twice to display inset picture.
Selecting AV channels
1
Open the »PIP SOURCE SETUP« by pressing »TXT«.
2
Select the »PIP Input« by pressing »
AV preset with »
3
Select the »PIP Type« by pressing »
signal type with »
4
Select »Confirm« with »
»G«.
Double window
1
To activate the double window function (split screen), press »PIP«
again.
– The last selected main and inset pictures are shown next to
each other.
Selecting the widescreen and left screen (double
window function) presets
1
Select the preset with »
directly.
Swapping the main and inset pictures
1
Press »Z« to swap the main and inset pictures.
Changing the position of the inset picture
1
Press »P« to change the position of the inset picture.
Changing the size of the inset picture
1
Press »S« to change the position of the inset picture.
Ending the PIP function
1
Press »PIP« two or three times to display inset picture.
Exiting double window
1
Press »PIP« to exit double window.
Λ « or »
–
+
« or » «.
Λ « or »
–
+
« or » «.
V « or » Λ « and confirm the setting with
Λ « or » V « step by step or with »1...0«
------------------------------------------
V « and change the
V « and change the
19