Titling Discs/Stations; Erasing Disc Title/Station Title; Blackout Mode On And Off - Alpine CDA-9833R Owner's Manual

Titling Discs/Stations

It is possible to title your favourite CD's or radio stations.
You cannot input titles on MP3/WMA discs.
1
Press TITLE and select the Title Display.
For details, see asterisk 2 of "Displaying the Title/Text" (page
23).
2
Press and hold TITLE for at least 2 seconds. The
first character will blink.
3
Press BAND/TEL. to select the characters/
symbols.
Upper case → Lower case → Numeral/Symbol → Upper case
4
Turn the Rotary encoder to select the desired
letter/numeral/symbol available for naming.
Press g or f to turn the page.
5
Press Rotary encoder to store the first character.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next letter
or symbol of your title.
6
Repeat steps 3 and 5 above to complete the titling.
Pressing the Rotary encoder after entering the 8th
character (the maximum number of characters that can
be input for CDA-9835R is 16) automatically stores the
title into memory.
When entering a title of less than 8 or 16 characters (for
example, 3 character title):
After entering 3 characters, the 4th character space will
be blinking. Go to step 7 to complete the title.
7
Press TITLE to record the title.
• If you cancel while entering a title, selected characters are not
written.
• You can enter 18 radio station titles (24 for the CDA-9833R model)
and 18 CD titles on this unit. If you try to store beyond the limit,
the display will show "FULL DATA." At this point, no more titles
can be stored. To input a new title, one of the previously inputted
titles must first be deleted.
• The CD Changer title length or memory capacity varies depending
upon the model being used.
• When you want to erase a title, enter a space (and symbol "
the CDA-9833R model).
• The operations described in steps 3 to 6 must be made within 10
seconds. The input mode will be cancelled if no action is taken for
over 10 seconds.

Erasing Disc Title/Station Title

1
Press TITLE to select the Title Display. Then, press
again and hold for at least 2 seconds.
• For details, see asterisk 2 of "Displaying the Title/Text"
(page 23).
2
Press and hold -/J for at least 2 seconds.
The title in the display will blink.
3
Press g or f repeatedly until the title you
want to erase is displayed.
4
Press and hold -/J for at least 2 seconds to erase
the title displayed.
5
Press TITLE to cancel the title erasing mode.
• You cannot erase CD-TEXT.
• "NO DATA" is displayed for 2 seconds if the title is not input in
step 2, or all titles are erased in step 4.

Blackout Mode On and Off

When Blackout mode is turned on, the display will turn off to reduce
power consumption.
This additional power enhances the sound quality.
Press and hold DISP/B.OUT for at least 2 seconds to
activate the blackout mode.
The display will turn off.
• If any button on the unit is pressed during the blackout mode, the
function will be displayed for 5 seconds to show the operation
before returning to Blackout mode.
To cancel Blackout mode, press and hold DISP/B.OUT for at
least 2 seconds.
" for
25
-EN