Bluetooth Setting; Setting The Bluetooth In Connection; General Setting; Birthday Opening Message Setting (Birthday Set) - Alpine CDA-9885R Owner's Manual

4
Turn the Rotary encoder to change the setting,
and then press /
(e.g. Select Subwoofer ON or Subwoofer OFF)
5
Press and hold FUNC./SETUP for at least 2
seconds to return to normal mode.
• Pressing AUDIO/RTN returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is cancelled.

Bluetooth Setting

Select Bluetooth from the setup main menu in step 2 above.
If an optional Bluetooth Box is connected, you can place a hands-free
call by a Bluetooth- equipped mobile phone.
Make this setting when the Bluetooth Box is connected and the
Bluetooth function is used. For details, refer to the Owner's Manual of
the optional Bluetooth Box.

Setting the Bluetooth IN Connection

Bluetooth IN ADAPTER / Bluetooth IN OFF (Initial Setting)
Set ADAPTER when the Bluetooth Box is connected.

General Setting

GENERAL is selected on the setup main menu in step 2.

Birthday Opening Message Setting (Birthday Set)

mm/dd
While opening MSG is set to ON (refer to "Opening Message ON/OFF
Setting" on page 22), then input your birthday details, a message can be
displayed on that day.
Turn the Rotary encoder to set "mm" (Month), then press
Turn the Rotary encoder again to set "dd" (Date).

Setting the Clock Display (Clock Mode)

AM (Before noon) 12:00 (12HOUR) / 00:00 (24HOUR) (Initial setting)
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.

Turning the Clock Display ON/OFF

Clock ON (Initial Setting) / Clock OFF
When ON is set, the time always appears in the lower left of the display.

Playing MP3/WMA/AAC Data (Play Mode)

CD-DA (Initial setting) / CDDA&MP3/WMA
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case, you
can select playback of a single session only, containing the CD data.
When a disc contains both CD and the MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
CD-DA : Only the CD data in Session 1 can be
played back.
CDDA&MP3/WMA: CD data, MP3/WMA/AAC files in mixed
mode, and multi-session discs can be
played back.
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first. (If you use an MP3 changer, you have to
change discs.)
20
-EN
/ENT.
/

Sound (Beep) Guide Function

Beep ON (Initial setting) / Beep OFF
This function will give audible feedback with varying tones depending
upon the button pressed.

Turning Mute Mode On/Off (INT Mute)

INT Mute ON / INT Mute OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.

Setting the AUX+ Mode

AUX+ Setup ON / AUX+ Setup OFF (Initial Setting)
Audio of devices that are connected to the unit using the FULL
SPEED™ Connection Cable (KCE-422i) is input to the unit.
• Press SOURCE/ , and select the AUX+ mode, and adjust the
volume, etc.

Setting the AUX Mode (V-Link)

AUX IN ON / AUX IN OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to
this component.
You can change the AUX name display when AUX IN is set to ON.
Press / /ENT when AUX IN is set to ON, and select AUX Name
by turning the Rotary encoder, then press
After that, turn the Rotary encoder to select the desired AUX name.
If the KCA-410C is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/
then press BAND/TA to select your desired device.
/ENT.

Setting the External Digital Input (Digital AUX)

Digital AUX ON / Digital AUX OFF (Initial setting)
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected, set Digital AUX to ON to enjoy 5.1-channel
surround sound.
• Press SOURCE/ , and select the D. AUX mode, and adjust the
volume, etc.
• After input selection is completed, turn the ignition off and back on
again. Setting of the optical digital input switch is completed.
• Depending on the connected audio processor, DVD player sound
may continue to be output, even though the source is changed to
another one. If this occurs, set the DVD player's power to OFF.
/ /ENT.
to select AUX mode and