Displaying Time; Blackout Mode On And Off; Setup - Alpine CDA-9885R Owner's Manual

About the indication display
When displaying Text, the following indicators are lit according to
the mode.
Indicator/Mode CD Mode
—
—
—
—
—
Text (Disc Name)
being displayed
Text (Track
Name) being
displayed
About "Text"
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
"text."
• Some characters may not be displayed correctly with this device,
depending on the character type.
• The CD changer must also be CD Text compatible for the Text
information to be displayed.
• If there is no TEXT information, the display is blank.
• The text or tag information may not be correctly displayed,
depending on the contents.

Displaying Time

Press TITLE repeatedly until the time is displayed.
Each press changes the display.
For details, see "Displaying the Text" (page 18).
• Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected will
be displayed for about 5 seconds before the time returns to the display.

Blackout Mode On and Off

When Blackout mode is turned on (except Radio Mode), all display
indications on this unit will turn off to reduce power consumption.
This additional power enhances the sound quality.
Press and hold TITLE for at least 2 seconds to activate
the blackout mode.
All display indications on this unit will turn off.
The "B.OUT" indicator lights up.
• If any button on the unit is pressed during the blackout mode, the
function will be displayed for 5 seconds to show the operation before
returning to Blackout mode.
To cancel Blackout mode, press and hold TITLE for at least 2
seconds.
MP3/WMA/AAC
iPod Mode
Mode
Folder Name
—
being displayed
Song Name Song Name
being displayed being displayed
Artist Name Artist Name
being displayed being displayed
Album Name Album Name
being displayed being displayed
File Name
—
being displayed
— —
— —

SETUP

You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Audio Setting, Display Setting, etc., can
be modified.
Rotary encoder
/ /
ENT /
SOURCE
AUDIO/RTN FUNC./SETUP
Use steps 1 to 5 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
1
Press and hold FUNC./SETUP for at least 2
seconds to activate the SETUP selection mode.
2
Turn the Rotary encoder to select the desired
item, and then press
1
*
Bluetooth GENERAL
1
TUNER Bluetooth *
(e.g. Select AUDIO)
3
Turn the Rotary encoder to select a setting item,
and then press / /ENT.
(e.g. Select Subwoofer)
1
*
Bluetooth :
Bluetooth IN
GENERAL:
Birthday Set Clock Mode
Play Mode Beep INT Mute
4
AUX Name * Digital AUX
Language Set Demo
AUDIO:
Subwoofer SUBW. System*
DISPLAY:
Illumination Dimmer
Font Select BGV Select
Illumination
TUNER:
FM Level RDS Regional
9
*
Auto Clock FM Level
1
* Displayed only when INT Mute is OFF.
2
* Refer to "Setting the Time and Calendar" (page 7).
3
* Displayed only when Bluetooth IN is OFF.
4
* Displayed only when AUX IN is ON.
5
* Displayed only when Subwoofer is ON.
6
* Refer to "Receiving RDS Regional (Local) Stations" (page 9).
7
* Refer to "Setting PTY31 (Emergency Broadcast) reception"
(page 10).
8
* Refer to "PI SEEK Setting" (page 10).
9
* Refer to "Setting the Time to automatically Adjust" (page 10).
BAND/TA
/ /ENT.
AUDIO DISPLAY
2
Clock Clock Adjust *
3
*
AUX+ Setup AUX IN
Power IC Steering
Birthday Set
5
Scroll Type Text Scroll
Calendar Opening MSG
6 7
* Alert PTY31 * PI Seek
19
-EN
8
*