Power Input; Signal Source Input - Planar EP4650 User Manual

Prepare Your Installation Location
Prepare Your Installation Location
You should have prepared the area where you will install the unit. If custom
enclosures are part of the installation, they must be fully designed to accommodate
the installation of the displays, as well as the installed unit and ventilation and
cooling requirements.
If your installation included a lot of construction or dust, it is highly recommended
that you clean all of the screens after the wall installation and configuration are
complete.

Power Input

Signal Source Input

Source inputs are located on the rear of the display.
RS232C LAN
18
DisplayPort HDMI 1 HDMI 2 DVI-D
Name
RS232C input
LAN input
DisplayPort
HDMI 1 input
HDMI 2 input
DVI-D input
VGA (PC) input
PC audio in
IR Extender
Audio Out
Y-Pb-Pr (Y-Cb-Cr) input
Audio In for Component input
S-video input
Video (composite) input
Audio In for S-Video/Video input
EP4650/EP5550 User Manual
VGA PC IR Audio
Extender
Audio Out
In
Connector
D-Sub 9-pin
RJ45
DisplayPort
HDMI
HDMI
D-Sub 24-pin
D-Sub 15-pin
Mini jack
Mini jack
Mini jack
RCA G/B/R
RCA L/R
Mini Din 4-pin
RCA
RCA L/R
Component Audio In S-Video Video Audio In