Error And Maintenance Messages - Brother MFC-8880DN User Manual

Hide thumbs Also See for MFC-8880DN:
Table of Contents

Advertisement

Error and maintenance messages

As with any sophisticated office product, errors may occur and consumable items may need to be
replaced. If this happens, your machine identifies the error or required routine maintenance and
shows the appropriate message. The most common error and maintenance messages are shown
below.
You can clear most errors and perform routine maintenance messages by yourself. If you need
more help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com/.
Error Message
Access Error
Cartridge Error
Comm.Error
Connection Fail
Cooling Down
Wait for a while
Cover is Open
138
Cause
The device is removed from the
USB direct interface while the
data is processing.
The toner cartridge is not installed
correctly.
Poor telephone line quality
caused a communication error.
You tried to poll a fax machine
that is not in Polled Waiting mode.
The temperature of the drum unit
or toner cartridge is too hot. The
machine will pause its current
print job and go into cooling down
mode. During the cooling down
mode, you will hear the cooling
fan running while the LCD shows
Cooling Down and
Wait for a while.
The front cover is not closed
completely.
Action
Press Stop/Exit. Reinsert the device and try
to print with Direct Print.
Pull out the drum unit, take out the toner
cartridge that is indicated on the LCD, and
put it back into the drum unit again.
Try sending the fax again or try connecting
the machine to another telephone line. If the
problem continues, call the telephone
company and ask them to check your
telephone line.
Check the other fax machine's polling setup.
Make sure that you can hear the fan in the
machine spinning and that the exhaust outlet
is not blocked by something.
If the fan is spinning, remove any obstacles
that surround the exhaust outlet, and then
leave the machine turned on but do not use
it for several minutes.
If the fan is not spinning, disconnect the
machine from the power for several minutes,
then reconnect it. (The machine can be
turned off for up to 60 hours without losing
faxes stored in the memory. See
Transferring your faxes or Fax Journal report
on page 143.)
Close the front cover of the machine.
C

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-8890dw

Table of Contents