Brother MFC-8880DN User Manual page 151

Error Message
Replace Parts
Drum
Replace Parts
Fuser Unit
Replace Parts
Laser Unit
Replace Parts
PF kit MP
Replace Parts
PF kit 1
Replace Parts
PF kit 2
Replace Toner
Scan Unable XX
(XX = Enter Code)
Scanner Locked
Size mismatch
Cause
The drum unit is the end of its life. Replace the drum unit.
The drum unit counter was not
reset when a new drum was
installed.
It is time to replace the fuser unit. Call your Brother dealer to replace the fuser
It is time to replace the laser unit. Call your Brother dealer to replace the laser
It is time to replace the paper
feeding kit for the MP tray.
It is time to replace the paper
feeding kit for Tray 1.
It is time to replace the paper
feeding kit for Tray 2.
The toner cartridge is at the end
of its life and printing is not
possible.
The machine has a mechanical
problem.
Document is too long for duplex
scanning.
The scanner lock is locked.
The paper in the tray is not the
correct size.
Troubleshooting and routine maintenance
Action
(See Replacing the drum unit on page 162.)
1 Open the front cover, and then press
Clear/Back.
2 Press 1 to reset.
unit.
unit.
Call your Brother dealer to replace the
PF Kit MP.
Call your Brother dealer to replace the
PF Kit 1.
Call your Brother dealer to replace the
PF Kit 2.
Replace the empty toner cartridge with a
new one. (See Replacing a toner cartridge
on page 159.)
Disconnect the machine from the power for
several minutes, then reconnect it. (The
machine can be turned off for up to 60 hours
without losing faxes stored in the memory.
See Transferring your faxes or Fax Journal
report on page 143.)
Press Stop/Exit. Use the suitable size of
paper for duplex scanning. (See Scan
on page 200.)
Open the document cover, and then release
the scanner lock lever.
Press Stop/Exit.
Load the correct size of paper in the tray and
set the "Paper Size" (Menu, 1, 2, 2 (See
Paper Size on page 24).
C
141