1 SpeedTouch™610 Installation
1.3.1. Configuration Setup for MS Windows OSs
Microsoft Windows
TCP/IP
The SpeedTouch™
Setup Wizard
The detection
procedure
12
One of the following OSs must be installed on your PC(s):
•
Microsoft Windows 95
•
Microsoft Windows 98 or 98SE
•
Microsoft Windows ME
•
Microsoft Windows NT4.0
•
Microsoft Windows 2000
•
Microsoft Windows XP.
You may need the Windows installation CD-rom during installation.
Make sure that TCP/IP (*) is installed on your PC(s).
(*) Transmission Control Protocol (TCP) / Internet Protocol (IP)
The SpeedTouch Setup wizard can be divided into two parts:
•
The detection procedure
•
The configuration procedure.
Step
Insert the SpeedTouch Setup CD-rom in your PC's CD-rom drive. The
1
wizard will start automatically.
Note: In case the wizard does not start automatically, open a 'Run' window via
Start > Run from the Start menu and enter following path: D:\SetupST.exe,
where D is the drive letter of your CD-rom drive.
The SpeedTouch Welcome wizard pops up:
2
To start the SpeedTouch Setup wizard, click SPEED TOUCH Setup.
Action
3EC 37770 AAAA TCZZA Ed. 02