Speedtouch™ Configuration Setup - THOMSON SpeedTouch 516 Setup And User Manual

1.3 SpeedTouch™ Configuration Setup
Internet connectivity
What you need from
your ISP
Configuration of the
SpeedTouch™
E-DOC-CTC-20040907-0001 v1.0
Some configuration may be required to prepare the SpeedTouch™ for Internet
connectivity.
Before setting up the SpeedTouch™ for Internet connectivity, make sure that the
SpeedTouch™ is prepared as described in
page 11.
In most cases, you need a user account with an Internet Service Provider (ISP) for
Internet access. For this user account, your ISP will provide you with:
A user name (logon ID)
A password
Other information may be required, depending on the ISP's specific requirements
and Service profile selection.
Depending on your computer's Operating System (OS) the configuration of your
Internet connectivity can be done automatically or manually.
If your computer runs:
A Microsoft Windows OS.
The SpeedTouch™ Setup wizard, included on the SpeedTouch™ Setup
CD-ROM, will automatically guide you through the configuration of both the
SpeedTouch™ and your PC for setting up the appropriate configuration.
Proceed with "1.3.1 Configuration Setup for Microsoft Windows Operating
Systems" on page 18.
Another OS (for example Mac OS, Unix, Linux).
The SpeedTouch™ Embedded Easy Setup wizard, accessible from the
SpeedTouch™ web pages, will automatically guide you through the
configuration of the SpeedTouch™.
Proceed with "1.3.2 Operating System Independent SpeedTouch™
Configuration Setup" on page
"1.2 Setting up the SpeedTouch™" on
23.
Chapter 1
SpeedTouch™ Installation
17