Console Configuration - Alcatel OMNISTACK 6148 User Manual

Console Configuration

If you are having difficulties making an out-of-band console connection to the serial
port on the agent module, you can display or modify the current settings for the
serial port through the Web agent. Click on the serial port icon in the switch image to
display or configure these settings, as shown below.
Parameter Default
Baud rate 9600 bps
Time-Out 10 minutes
Data bits 8 bits
Stop bits 1 bit
Parity none
Auto-Refresh Time 5 seconds
Description
The rate at which data is sent between devices.
Options : 2400, 4800, 9600, 19200, and auto detection.
Note that when AUTO is selected, you need to first press the Enter
key once to set the data rate and initialize the connection.
If no input is received from the attached device after this interval, the
current session is automatically closed.
Range : 0 - 100 minutes; 0: disabled
Sets the data bits of the RS-232 port.
Options : 7, 8
Sets the stop bits of the RS-232 port.
Options : 1, 2
Sets the parity of the RS-232 port.
Options : none/odd/even
Sets the interval before a console session will auto refresh the
console information, such as Spanning Tree Information, Port
Configuration, Port Statistics, and RMON Statistics.
Range : 5-255 seconds; 0: disabled
Panel Display
3-5