Firewall - THOMSON SPEEDTOUCH 516 User Manual

Chapter 4
SpeedTouch™ Web Interface

4.6.7 Firewall

Overview
Configure
80
The Overview page summarizes the overall security policy configured on your
SpeedTouch™.
The Configure page allows you to select the security level of the SpeedTouch™.
Select one of following security levels:
Block All: to protect your network from all attempts of incoming (from
untrusted site) connection requests and to perform checks on outgoing (from
trusted site) connections. This level is meant to prevent incoming malicious
traffic.
Standard: to protect your network from all incoming (from untrusted site)
connection requests while permitting safe outgoing connections. This is the
default.
Disabled: to allow all incoming and outgoing traffic. This does not mean the
complete SpeedTouch™ firewall is disabled. It means all traffic coming in on one
interface and going out on another is allowed, but access to the embedded
services of the SpeedTouch™ (as telnet, web interface,...) is only allowed for
clients residing on the LAN side, so the SpeedTouch™ itself stays protected.
Tasks
In the Pick a task... list, click:
Assign a game or application to a local network device to allow a game or
service to run on a specific network device.
For more information, see "4.6.2 Game & Application Sharing" on page 73.
E-DOC-CTC-20050120-0003 v1.0