Settings; Sms Cb; Sounds; Mode - Alcatel OT-E230 User Manual

Mobile phone
Table of Contents

Advertisement

CVLE6CRYSTAL_UM_GB-09-11-06
6.6

Settings

You can change the message settings:
SceCentre
The phone number of your operator's service
centre (it may be provided automatically).
Email ctre
(1)
The number of the server for sending emails.
Validity
Set the time period during which attempts to
send the message to the recipient will be
repeated in case of failure.
Deliv. report
Request for acknowledgement of receipt for
each message sent.
6.7

SMS CB

(1)
These are messages broadcast over the network (weather, traffic, etc..).
You can decide to receive them or not. Press the left softkey to access the
following options:
Activate
Activate/deactivate the reception of broadcast
messages.
Read
View the received channel messages.
NewCBcod.
Add a new channel ID obtained from your
service provider.
List
List of the available channels (you can modify or
delete one of them).
(1)
Contact your network operator to check service availability.
35
1/12/06
16:21
Page 35
7

Sounds ............................

From the main screen, press the left softkey to access the menu then
select the
icon and select one of the following options in order to
customise your telephone.
7.1

Mode

Ringtone

Only the tone is played.
Vibrator
Only vibrator is set (but the alarms and low
battery sound will be played anyway).
Vibrator+ring
Vibrator and tone at the same time.
Vibr.then ring
Vibrator then tone.
Vibr.Beep.Ring
Vibrator then warning beep, then tone.
Silence
No sound nor beep (but the alarms and low
battery sound will be played anyway).
7.2

Volume

The volume can be adjusted to one of the levels proposed.
7.3
Ringtone
Select a melody to assign to an incoming call.
36

Advertisement

Table of Contents
loading

Table of Contents