Upgrading Main Memory - Fujitsu Siemens Computers D1321 Technical Manual

Add-on modules

Upgrading main memory

These slots are suitable for DIMM format 32, 64, 128, 256, 512, 1024 MB SDRAM memory
modules.
Memory modules with different memory capacities can be combined.
You may only use unbuffered 3.3 V memory modules. Buffered memory modules are not
!
supported.
SDRAM memory modules must meet the PC133 specification.
Installing a memory module
2
Ê
Push the holders on each side of the memory compartment outwards.
Ê
Insert the memory module into the location (1).
Ê
At the same time flip the lateral holders upwards until the memory module snaps in place (2).
Removing a memory module
1
Ê
Push the clips on the right and left of the compartment outward (1).
Ê
Carefully remove the memory module from the compartment (2).
10 - English
2
1
A26361-D1321-Z120-1-7419