Installing drivers
Ê
Insert the "Drivers & Utilities" CD.
Ê
If the CD doesn't start automatically call the START.EXE file in the main directory of the CD.
Ê
If the system board list is displayed select the system board or select under Driver the
operating system used and the audio and video drivers.
Upgrading main memory
Support:
The system needs at least one module.
Size:
From 64 Mbytes up to 2 Gbytes DDR SDRAM
Technology:
PC2100 unbuffered DDR-DIMM modules.
184 pin, 2,5 V, 64 bit, no ECC support
184 pin, 2,5 V, 72 bit, ECC-support
Granularity:
For one socket 64, 128, 256, 512 or 1024 MB
Troubleshooting
Message BIOS update
The System BIOS provides optimum support for the processor you have chosen. If the message
BIOS update for installed CPU failed
appears the microcode required for the processor inserted must still be loaded. Further information
on this is available in the "BIOS Setup" manual on the "Drivers & Utilities" CD provided.
The screen stays blank
If your screen stays blank this may have the following cause:
The wrong RAM memory module has been inserted
Ê
See the chapter "Main Memory" for information which memory modules can be used.
ACPI S3 (Save-to-RAM) and/or ACPI S4 (Save-to-Disk) doesn't work
This system board is fully compliant for ACPI S3 and S4. Therefore it is PC99 certified by Microsoft.
If you have any problems with ACPI please ensure that all of your components are supporting
ACPI S3 and S4.
-
Operating system
-
Hardware and drivers of controllers (e. g. VGA, audio, LAN, SCSI controllers).
For further information please refer to http://developer.intel.com/technology/iapc/involve.htm.
A26361-D1332-Z180-1-7619
Installing drivers
English - 11