Hard Disk Connection; Lan Connector; Pci Bus Interrupts - Fujitsu Siemens Computers D1321 Technical Manual

Table of Contents

Advertisement

Features

Hard disk connection

An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for
the ultra ATA/66or ultra ATA/100 mode.
Ê
Connect the end of the cable marked with blue to the system board.

LAN connector

This system board has an optional Intel 82550ET LAN controller which supports transfer speeds of
10 Mbit/s and 100 Mbit/s. The LAN controller is equipped with a 3 KB transmission and receiving
buffer (FIFO) and supports WOL function through Magic Packetä.
It is also possible to boot a device without its own boot hard disk via LAN. Here Bootix LAN BootP
and Intel PXE are supported.
The LAN RJ45 connector is equipped with a yellow and a green LED (light emitting diode).
2
Yellow
a connection exists (e.g. to a hub).
Green
Link Mode:
WOL mode:

PCI bus interrupts

The following table shows which PCI bus interrupts are assigned on the system board.
PCI bus interrupt
B, C, D, A
C, D, A, B
D, A, B, C
A, B
D
H
E
B
B
6 - English
1
the LAN connection is active.
a Magic Packet
Component on system board:
PCI bus slot 1
PCI bus slot 2
PCI bus slot 3
AGP slot
First USB controller
Second USB controller
LAN controller
SMBus
AC'97 Audio
1 = Yellow indicator
2 = Green indicator
TM
is being received.
A26361-D1321-Z120-1-7419

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents