Quick Start Function; Memory Function - Bifinett KH 1106 Operating Instructions Manual

KH1106_Mikrowelle_EN.qxd
Interrupting the cooking process
Press button y "Cancel/Stop" once to
interrupt a cooking process. The applian-
ce interrupts the cooking process and
stops the remaining time. Press button
p "Start/quick start", to continue the
cooking process.
Abort the cooking process
Press button y "Cancel/Stop" twice to
abort a cooking process. The appliance
switches back to standby mode.
Prolong/shorten the cooking time
To increase/decrease the cooking time
during cooking, turn the dial o:
• turn clockwise and the cooking time
is increased by one minute.
• turn anti-clockwise and the cooking
time is decreased by one minute.
In order to increase the cooking time
by 30 seconds at a time, press button p
"Start /quick start".
Note: In standby mode and during
defrosting, the time cannot be alte-
red by means of the dial.

Quick start function

With this function you can immediately
for 30 seconds (or longer, up to 95 minu-
tes) begin cooking at 100 % power. Press
button p "Start/quick start". In the LED
display the symbols for microwave ope-
ration and cooking flash
count down begins.
24.11.2005 17:25 Uhr

Memory function

Use the memory function, if you wish to
carry out 3 processes after one another.
If you choose several operations and one
of them includes defrosting, defrosting
must be set as the first in the sequence.
After finishing a process, the acoustic
signal sounds once, then the next pro-
cess immediately starts
Example
You require 300 watts for 15 minutes
Use microwave power for defrosting +
10 minutes at 600 watts microwave
power for cooking + 10 minutes grilling
for the preparation of food.
1. Press button i "Memory" once . "3-
2. Press button u "Microwave" six time
3. Turn the dial o to set the cooking
4. Press button i "Memory" once
5. Press button u "Microwave" three
. The
- 13 -
Seite 13
1" is displayed in the LED display.
to set 300 watts power for defro-
sting. "P300" is displayed in the LED
display.
time (duration). Set 15:00 at 300 w
power.
again. Now "3-2" is displayed in the
LED display.
times, to set 600 watts power. "P600"
is displayed in the LED display.
KH 1106