Glass Cleaning - Dimplex DF203A Owner's Manual

Maintenance
2. On the back of the Compact
Fireplace remove the screws
from the light access cover
(Figure 11)
3. Remove the light access
cover.
4. Reach into the opening,
locate and examine the bulbs
to determine which bulb(s)
require replacement.
5. Unscrew the bulb(s) counter
clockwise.
6. Insert new bulb(s).
7. Install the light access cover
and install the screws.

Glass Cleaning

The glass is cleaned in the factory
during the assembly operation.
During shipment, installation, han-
dling, etc., the front glass panel
may collect dust particles; these
can be removed by dusting lightly
with a clean dry cloth.
To remove fingerprints or other
marks, the front glass panel can
be cleaned with a damp cloth.
The front glass panel should be
completely dried with a lint free
cloth to prevent water spots. To
prevent scratching, do not use
abrasive cleaners or spray liquids
on the clear door surface.
14
Compact Fireplace Surface
Cleaning
Use warm water only to clean
painted surfaces of the Compact
Fireplace. Do not use abrasive
cleaners.
Servicing
Except for light bulb replacement
and cleaning described above, an
authorized service representative
should perform any other servicing.
Figure 11
Light Bulbs
Screws
Light Access
Cover
www.dimplex.com