Maintenance - Dimplex DF203A Owner's Manual

Operation
Battery Replacement
To replace the battery:
1. Slide battery cover open on
the remote control (Figure 10).
2. Correctly install one 12 Volt
(A23) battery in the battery
holder.

Maintenance

  WARNING: Disconnect power
and heater has cooled before
attempting any maintenance or
cleaning to reduce the risk of
fire, electric shock or damage
to persons.
!
NOTE: The fireplace should
not be operated with an accumu-
lation of dust or dirt on or in the
unit, as this can cause a build up
of heat and eventual damage. For
this reason the heater must be
inspected regularly, depending
upon conditions and at least at
yearly intervals.
Light Bulb Replacement
Light bulbs need to be replaced
when you notice a dark section of
the flame or when the clarity and
detail of the log exterior disap-
pears. There are two bulbs under
the log set which generate the
3. Close the battery cover.
Battery must be recycled
or disposed of properly.
Check with your Local
Authority or Retailer for recycling
advice in your area
flames and embers.
Helpful Hints: It is a good idea to
replace all light bulbs at one time
if they are close to the end of their
rated life. Group replacement will
reduce the number of times you
need to open the unit to replace
light bulbs.
Bulb Requirements
Quantity of 2 clear chandelier or
candelabra bulbs with an J-12
(small) socket base, 60 watt rat-
ing. Example GE 60BC or Philips
60 CTC. Do not exceed 60 Watt
per bulb.
To Replace The Light Bulbs
CAUTION:
minutes for light bulbs to cool off
before touching bulbs to avoid ac-
cidental burning of skin.
1. Unplug the unit from power
outlet.
Allow at least 5
13