Disk; Format; Smart - Vista Quantum Plus Installation And User Manual

Quantum Plus installation and user manual

3-2. Disk

Format

Formatting of the drive is used when new drives are installed or you need to wipe all
information on the disk.
Click on OFF to turn to ON, then click on Execute, click YES, to confirm

Smart

This function is used to keep a check on the health of the Hard disk. The parameters which
can be monitored are:
1. Read/Write errors on the drive
2. Drive temperature.
To set enable these features, click on "Set", three options will be presented:
Smart – Turn to on to enable feature
Temperature – Using the on screen keyboard set the temperature at which the warning is to
be reported. (recommended setting 45)
Message Box - The message box can be turned on or off to give a visible warning.
Alternatively and E-mail; can be sent if any problems occur (see the Event
menu set-up section on page 51-53)
36