Record & Disk Management; Record; Auto Mode - Vista VL-04DVR Quick Setup Manual

5. Record & Disk Management

5.1 Record

Please format the HDDs on initial install of the DVR and before recording.
→ →
Click the start button (bottom left) then select Settings Record Mode Settings to go to the
mode settings interface. Set the record time under the "Manual Record Settings" and then click
"Apply". There are two record modes: auto mode and manual mode.

5.1.1 Auto mode

Motion Record: Motion alarm record will be enabled when motion alarm happens.
Sensor Record: Sensor alarm record will be enabled when sensor alarm happens.
Motion Record+Sensor Record: Motion/sensor alarm record will be enabled when motion/sensor
alarm happens.
Always(24×7) Record+Motion Record: Normal record is enabled all the time; motion alarm record
will be started when motion alarm happens.
ⅹ
Always(24 7) Record+Sensor Record: Normal record is enabled all the time; sensor alarm record
19
VL04/08/16DVR Quick Guide Ver 1.0 2022-05