Vista Quantum Plus Installation And User Manual page 45

Quantum Plus installation and user manual
Preset positions
1. To store a preset position
Move the camera to the required position then press the record key
by the number key of the preset to be stored (1 – 9)
2. To recall a Preset
Press the search key
Run Tour 1
To run Tour 1, press the search key
requires a keyboard to set it up in the domes menu.
Remote control functions
Camera selection
The PTZ cameras can be controlled in either full screen or split screen mode. If in full
screen mode press the camera selection key
camera to the next on the split screen. When the icon appears on the camera to be
controlled then press the PTZ key
If in full screen mode then simply press the PTZ key
Pan and Tilt control
To move the dome left / right / up or down use the arrows keys
followed by the number (1 -9).
followed by the number 0 (Zero). The tour
.
45
, the camera icon will step from one
.
followed
.