Vlan - Draytek Vigor2830 Series User Manual

4 . 2 . 4 V L A N
4 . 2 . 4 V L A N
Virtual LAN function provides you a very convenient way to manage hosts by grouping them
based on the physical port. You can also manage the in/out rate of each port. Go to LAN page
and select VLAN. The following page will appear. Click Enable to invoke VLAN function.
Note: Settings in this page only applied to LAN port but not WAN port.
VLAN Tag
LAN
Wireless LAN
Subnet
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on the
LAN while sending them out.
Please type the tag value and specify the priority for the packets
sending by LAN.
Disable – Disable the function of VLAN with tag.
VID – Type the value as the VLAN ID number. The range is
form 0 to 4095.
Priority – Type the packet priority number for such VLAN. The
range is from 0 to 7.
P1 – P4 – Check the LAN port(s) to be grouped under the
selected VLAN.
SSID1 – SSID4 – Check the SSID box(es) for the wireless clients
to be grouped under the selected VLAN.
Choose one of them to make the selected VLAN mapping to the
specified subnet only. For example, LAN1 is specified for
VLAN0. It means that PCs grouped under VLAN0 can get the IP
address(es) that specified by the subnet.
131
Vigor2830 Series User's Guide