Gigabyte GA-5BXWL-RH User Manual page 43

Security
Phoenix - AwardBIOS CMOS Setup Utility
Info Sysetm Advanced
Set Supervisor Password
x Set User Password
Password Check
Halt On
Chassis Opening Warning
x Hard Disk Security
x Security Chip Configuration
: Move Enter: Select +/-/PU/PD: Value
F5: Previous Values
When you select this function, the following message will appear at the center of the screen to
assist you in creating a password.
Type the password, up to eight characters, and press <Enter>. You will be asked to confirm the
entered password. Type the password again and press <Enter>. You may also press <Esc> to
abort the selection and not enter a password.
To disable password, just press <Enter> when you are prompted to enter password. A
message "PASSWORD DISABLED" will appear to confirm the password being disabled. Once the
password is disabled, the system will boot and you can enter Setup freely.
The BIOS Setup program allows you to specify two separate passwords:
SUPERVISOR PASSWORD and a USER PASSWORD. When disabled, anyone may access all
BIOS Setup program function. When enabled, the Supervisor password is required for entering the
BIOS Setup program and having full configuration fields, the User password is required to access
only basic items.
If you select "System" at "Password Check" in Advance BIOS Features Menu, you will be
prompted for the password every time the system is rebooted or any time you try to enter Setup
Menu.
If you select "Setup" at "Password Check" in Advance BIOS Features Menu, you will be
prompted only when you try to enter Setup.
Seccurity PC Health
[Setup]
[All Errors]
[Disabled]
F10: Save
F7: Setup Defaults
Figure 4: Security
4 4
BIOS Setup
Exit
Item Help
ESC: Exit F1: General Help